We work across Charlotte and surrounding areas including Concord, Huntersville, and Mooresville. Every epoxy floor coating project we take on gets the same focused attention, whether it's a single-car garage or a large commercial space. The goal is always a floor that looks sharp and handles whatever gets thrown at it.
Epoxy floor coatings work for garages, basements, commercial floors, and more. Here's what Charlotte homeowners and businesses get from an Endure installation.
Hard, chemical-resistant surface that cleans up fast
Available in solid colors, flake blends, and polished finishes
Bonds directly to prepared concrete for long-term adhesion
Works in residential garages, basements, and living spaces
Suitable for commercial and industrial floor applications
Slip-resistant finish options available for safety-conscious installs
Covers surface imperfections for a uniform, finished look
See what Charlotte-area customers say about their Endure epoxy floor coating results.
Absolutely transformed my garage! I couldn't be happier with my experience with Endure Concrete Coatings. The installer, James went above and beyond, allowing me to use more than the typical amount of colors to create a…
Owner reply
Thank you so much for the incredible review, We’re honored you trusted Endure Concrete Coatings with your garage…
Dori Petriella
2026-07-06
We hired James and his crew with Endure Concrete Coatings to epoxy coat our bay floors and everything was top notch! Communication, timing and quality of work! I would recommend them to anyone!
Owner reply
Thanks for such an awesome review. It was such a fun project.
dustin sneed
2025-06-08
From the initial consultation to the final walk-through, Endure Concrete Coatings made everything easy. The owner and crew were professional, punctual, and clearly skilled. Our custom floor looks amazing and feels built…
Owner reply
Thank you, Brad! I'm delighted to hear that you found our team professional and punctual from start to finish. It's…
Brad Lanning
2026-01-16
I am obsessed with my new garage floor! James and his team at Endure Concrete Coatings did an outstanding job! I love the color blend. I’m pretty sure I have the best looking garage in the neighborhood!
Owner reply
Thank you so much for your kind words, Nicole! We're thrilled to hear that you love your new garage floor and the color…
Nicole Jones
2025-09-25
This was our second floor project working with James at Endure Concrete coatings. Again was a pleasure to work with and could not have asked for better results. Attention to detail was spot on. Highly recommend Endure…
Owner reply
Bryan. Thanks so much for trusting in Endure. It was a pleasure to do the floor and get the company logo stained in the…
Bryan Craft
2025-07-22
From beginning to end, James and his crew at Endure Concrete Coatings exceeded our very high expectations. We have had satisfactory garage floor coatings in previous homes but James and his team delivered a garage floor…
Owner reply
Dana. Thanks for such a great review. So glad we could take care of your new garage so that you have years and years of…
Dana Randle
2025-05-01
A good epoxy coating starts well before any product hits the floor. Here's how Endure Concrete Coatings approaches every epoxy floor coating project in Charlotte and the surrounding area.
We inspect the slab for cracks, moisture issues, or previous coatings that could affect adhesion. This step shapes every decision that follows.
We grind or shot-blast the concrete to open the surface profile. Proper prep is what separates a coating that peels from one that holds.
Any cracks or problem areas are filled and stabilized before coating begins, so you're not just covering up issues.
We apply the base coat, broadcast material if applicable, and seal with a topcoat suited to your traffic level and finish preference.
Before we leave the job site, we walk the floor with you to confirm the finish meets expectations and answer any care questions.
Find clear answers about service options, scheduling, preparation, and what to expect before you request an estimate.
Q1
Most epoxy floors are ready for light foot traffic within 24 hours. Full cure for vehicle or heavy use typically takes 72 hours. We'll give you a specific timeline based on the products used on your project.
Q2
Yes, as long as the concrete is structurally sound and properly prepped. We assess the slab first, and if there are moisture problems or a failed previous coating, those get addressed before we apply anything new.
Q3
It's one of the most popular choices for garages in the Charlotte area. Epoxy handles vehicle traffic, oil drips, and temperature swings well, and it makes the garage much easier to keep clean.
Q4
Epoxy provides a thick, durable base coat with good chemical resistance. Polyaspartic coatings cure faster and hold up better against UV exposure as a topcoat. Many of our installs use both in a layered system.
Q5
Epoxy comes in solid colors as well as flake broadcast systems that add texture and hide small imperfections in the slab. We'll walk you through samples so you can pick a look that fits the space, whether it's a clean single tone or a more decorative flake blend.
Q6
Day-to-day cleaning is straightforward. Sweep or dust mop regularly and clean spills with a mild detergent, avoiding harsh solvents. We'll go over specific care steps for your floor's finish before we leave.
Q7
We serve Charlotte and surrounding communities including Concord, Huntersville, Mooresville, Kannapolis, Cornelius, Statesville, and Salisbury. Contact us to confirm service availability for your specific location.
Q8
Basements are a common application, and moisture is the main factor to consider. We test for moisture vapor transmission before coating. A properly prepped and coated basement floor resists humidity and is far easier to clean than bare concrete.
Endure Concrete Coatings provides epoxy, polyaspartic, and polished concrete systems for residential and commercial floors across Charlotte, NC and the surrounding communities.
© 2026 Endure Concrete Coatings. All rights reserved.
